Difference between revisions of "SECT"

From VCAT WIKI
Jump to: navigation, search
(SECT Reports)
(SECT Reports)
Line 19: Line 19:
  
  
==STEP 1: Validate SECT Data==
+
== Validation Issues ==
  
This step will provide you with a list of issues that need to be addressed before proceeding to the next steps and being able to submit your SECT reports. The State only allows for 1 (and only one) Teacher of Record per section. If a section has more than one teacher of record assigned to a section in VCAT, for example, the system will tell you and will also provide you with the name of the section(s) so you'll know which ones need to be fixed. Other examples of issues you might find in this step are students and/or educators missing their state ID. In order for those students and/or educators to be part of the reports, their state ID must be entered in VCAT.
+
This tab will only show if any validation issues were found. It will provide you with a list of issues that need to be addressed before proceeding to submit your SECT reports. The State only allows for 1 (and only one) Teacher of Record per section. If a section has more than one teacher of record assigned to a section in VCAT, for example, the system will tell you and will also provide you with the name of the section(s) so you'll know which ones need to be fixed. Other examples of issues you might find in this step are students and/or educators missing their state ID. In order for those students and/or educators to be part of the reports, their state ID must be entered in VCAT.
  
 
'''To enter a student state ID:'''
 
'''To enter a student state ID:'''
  
• Go to Students tab.
+
• Go to the Data tab.
  
• Click on Edit sub tab.
+
• Click on All student tab.
  
In the field in the Students palette, type in the last name or the first name.
+
Click on Student List.
  
Press the Search button.
+
In the Search field of the filter section at the top, type in the last name or the first name.
  
If your search returns more than one student, click on the Local ID for the student you are interested in.
+
Press Enter or click on the Filter button on the right.
  
In the State ID field, type in the student's state ID.
+
Click on the Edit button in front of the student you are interested in.
  
• Hit the Save Changes button.
+
• Under the Information tab, type in the student's state ID in the State ID field.
 +
 
 +
• Hit the Save button on the bottom left.
 
    
 
    
  
 
'''To enter an educator state ID:'''
 
'''To enter an educator state ID:'''
  
• Go to Staff tab.
+
• Go to the Data tab.
  
• Click on Edit sub tab.
+
• Click on All student tab.
  
In the Name or ID field, type in the last name or the first name.
+
Click on Staff List.
  
Hit Enter or click on Filter button.
+
In the Search field of the filter section at the top, type in the last name or the first name.
  
To select the educator, click on the Edit button to the left of the educator's userid.
+
Press Enter or click on the Filter button on the right.
 +
 
 +
• Click on the Edit button in front of the educator you are interested in.
  
 
• Under the Information tab, type in the educator's state ID in the State ID field.
 
• Under the Information tab, type in the educator's state ID in the State ID field.
  
• Hit the Save button.
+
• Hit the Save button on the bottom left.
 
+
 
'''Once you have reviewed and taken care of Validation Issues, click on the 'Go to Next Page' blue link at the top of the page.'''
+
 
+
  
 
==STEP 2: Educator Course Summary==
 
==STEP 2: Educator Course Summary==

Revision as of 18:00, 5 April 2016

VCAT has been set up with validation steps to guide you and facilitate the process. Those steps have been incorporated in the generation of the SECT reports.

SECT Reports

To run the SECT reports:

• Login to VCAT, go to the A tab, click on SECT.

• Select 2015-2016 Year.

• Select the school (one school at a time - repeat these steps for each individual school).

• Click on Validate.


This will bring you the following tabs:


Validation Issues

This tab will only show if any validation issues were found. It will provide you with a list of issues that need to be addressed before proceeding to submit your SECT reports. The State only allows for 1 (and only one) Teacher of Record per section. If a section has more than one teacher of record assigned to a section in VCAT, for example, the system will tell you and will also provide you with the name of the section(s) so you'll know which ones need to be fixed. Other examples of issues you might find in this step are students and/or educators missing their state ID. In order for those students and/or educators to be part of the reports, their state ID must be entered in VCAT.

To enter a student state ID:

• Go to the Data tab.

• Click on All student tab.

• Click on Student List.

• In the Search field of the filter section at the top, type in the last name or the first name.

• Press Enter or click on the Filter button on the right.

• Click on the Edit button in front of the student you are interested in.

• Under the Information tab, type in the student's state ID in the State ID field.

• Hit the Save button on the bottom left.


To enter an educator state ID:

• Go to the Data tab.

• Click on All student tab.

• Click on Staff List.

• In the Search field of the filter section at the top, type in the last name or the first name.

• Press Enter or click on the Filter button on the right.

• Click on the Edit button in front of the educator you are interested in.

• Under the Information tab, type in the educator's state ID in the State ID field.

• Hit the Save button on the bottom left.


STEP 2: Educator Course Summary

This step provides you with the list of all educators part of the SECT reports, with their role and each course they teach. This is the perfect opportunity to review that information and make sure it all makes sense. If you'd like to sort by a particular column, just click on the header of that column.

If you notice an educator whose assignment is incorrect, you need to go to the Staff tab/ Edit sub tab to make the correction.

Once you have reviewed the Educator Course Summary and made necessary changes if needed, click on the 'Go to Next Page' blue link at the top of the page.


STEP 3: Missing SECT Data

This step lists the 'missing' data, based on where there should be SECT data. When you know that all your data has been entered but VCAT still displays 'missing' data, you should review that list and look closely at the students and the courses for which they are missing data. Often, the students missing data are students that have left early in the year and do not have data. In this case, there is no need to worry about them. All the 'missing' data does not show up on the final SECT reports. On the other hand, if you notice students that should have data, this gives you the opportunity to investigate why they are showing up without any data and make sure that data gets entered for them.

Once you have reviewed the Missing Data and students left in the list truly belong in the list, click on the 'Go to Next Page' blue link at the top of the page.


STEP 4: Valid SECT Data

In a readable format (compare to the official .csv State files), this step shows you the list of all the data part of the SECT reports.

To get to the official files required by the State, click on the 'Go to Next Page' blue link at the top of the page.


STEP 5: Vermont Student Teacher Educator Transcript Report

This step gives you the official files (two of them) to download.

To download the School Courses File, click on the Download School Courses File blue link. It will create the file and download it to your computer. Once downloaded, click the Exit Report and click on Download Student Transcripts File to download that file as well.

Now that you have both files on your computer, you need to upload both of them to the SECT section of the Students Census.