Selecting Information

From VCAT WIKI
Revision as of 17:17, 15 December 2016 by Judithbergeron (Talk | contribs)

Jump to: navigation, search

Information Lists

There are 4 possible lists of Information, but depending on your Student Selection, all 4 lists might not be visible. The lists can also vary between users, based on their access.

Show all information

Wiki VCAT2 ShowAllInformation w ShowRetiredBox.png

• List of all of the information in your VCAT system.


Show current and historical information

Wiki VCAT2 ShowCurrHist w ShowRetiredBox.png

• List of all the information related/linked to the group of students you have selected for the year selected and previous years.


Show current information

Wiki VCAT2 ShowCurr w ShowRetiredBox.png

• List of all the information linked to the group of students you have selected for the selected year only.


Show information for data entry

Wiki VCAT2 ShowDataEntry w ShowRetiredBox.png

• List of all the information linked to the group of students you have selected for the selected year, based on your 'Edit Access' (Ability to enter data). Locked information will also be listed even though it will not be 'editable'.

Filter Bar

The list of information can be lengthy and spread over multiple pages. By default, only the first page will be displayed.


Number of Entries per page

At the top of the list, you can adjust the number of entries per page if you like or use the filter bar to shorten the list to facilitate the information selection.

VCAT2 entries per page.png


Type, Grade, Subject Filters

The list of information can be filtered by Type, Grade, and/or Subject to shorten the selection list. Use the Clear button on the right of the Subject filter to cancel all filters.

VCAT2 filter bar.png

Single Selection of Information

1. Click on Select Information in the Information box to bring up the list of information. If any information had previously been selected, clicking on it in the Information box will allow you to change your selection. When your information is highlighted in blue, selecting a different piece of Information by clicking on its name will replace the previous selection.

Wiki VCAT2 SelectInformation.png


For Entering Data, only one piece of information can be selected.

For Viewing Data, multiple pieces of information can be selected.


2. Click on the Information (e.g. Report Card Grade 4) to reveal its unit(s) and select the unit you wish to enter data for (e.g. Reading Standards). To remove a selected piece of information, click on the name of a new piece of information you wish to select in its place or remove the check. You can also get rid of it by clicking on the 'x' in the top left of the Information box or using the 'clear all' right below.

Wiki VCAT2 SingleInformationSelected.png

NOTE: The list of information can be lengthy and spread over multiple pages. By default, only the first page will be displayed. At the top, you can adjust the number of entries per page if you like or use the filter bar. The list of information can be filtered by Type, Grade, and/or Subject to narrow down the selection. Use the Clear button on the right of the Subject filter to cancel all filters.

Multiple Selections of Information

How to Select Multiple Pieces of Information

When multiple pieces of information are selected, you can view, compare, and analyze the data.

  • There are two ways to select multiple pieces of information:

1. After selecting one piece of information, hover in front of the information you wish to select and a check box will appear. Simply click in the box (not on the name) in front of the other information you want to select it. (Clicking on the name will select that information BUT replace your first selection)

Wiki VCAT2 Selecting2pcesOfInfo method1.png


2. After selecting one piece of information, click on the + right below the Information Box. It will add a box for which you just select the information by clicking its name or checking the box in front of its name.

Wiki VCAT2 Selecting2pcesOfInfo method2.png


Wiki VCAT2 Selecting2pcesOfInfo method2 SelectInfo.png


Wiki VCAT2 2pcesOfInfo selected.png

How to Unselect Information

  • There are four ways to unselect selected piece(s) of information:

1. Click on its name in the information list on the right.

Wiki VCAT2 2pcesOfInfo selected.png


2. Remove the check by clicking in the checkbox in front of the information you wish to unselect.

Wiki VCAT2 2pcesOfInfo selected.png


3. Hover in the information box of the selected information you wish to unselect, an X will appear on the left corner. Simply click on the X to unselect the information.

Wiki VCAT2 2pcesOfInfo selected clickX to unselect.png


4. Click on clear all to unselect all pieces of information selected.

Wiki VCAT2 2pcesOfInfo selected ClearAll.png

Viewing Information

Accessibility to View Curriculum/Assessment/Rubric

Each piece of information will have a Curriculum, an Assessment, and a Rubric page. Each page may contain various details. These pages can only be accessed/viewed when ONLY ONE piece of information is selected.

No Information selected --> Curriculum, Assessment, Rubric pages not accessible

Wiki VCAT2 noInfo.png


ONLY one piece of information selected --> Curriculum, Assessment, Rubric pages are accessible

Wiki VCAT2 SingleInfo.png


Multiple pieces of information selected --> Curriculum, Assessment, Rubric pages not accessible

Wiki VCAT2 MultipleInfo.png


View Curriculum

Select Curriculum to view the curriculum page of the information selected.

Wiki VCAT2 CurriculumPageSelected2.png

The curriculum page will contain the name of the unit, the name of the course this unit is part of, and the Type, Grade, Subject linked to it. It can also include elements of the Understanding by Design Framework (Essential Questions, Students will understand that, Students will know,...), Activities, Resources, and Standards addressed in this unit.

View Assessment

Select Assessment to view the assessment page of the information selected.

Wiki VCAT2 AssessmentPageSelected2.png

The assessment page will contain the name of the unit, the name of the course this unit is part of, and the Type, Grade, Subject linked to it. It can also provide details about the task, the materials needed - including links for student worksheets, and any additional directions that would be helpful to the teachers. It also mentions if this assessment is required or not.

View Rubric

Select Rubric to view the rubric page of the information selected.

Wiki VCAT2 RubricPageSelected.png

The rubric page will contain the name of the unit, the name of the course this unit is part of, and the Type, Grade, Subject linked to it. It provides details about what is being measured and how it is measured. It lists the criteria, their possible scores, and can include a panoply of attributes (e.g. Terms, Scales, Weight, Standards, Criterion Description, Rating Description,...).